Mitsubishi Electric Got 1000, User Manual

Page: 110 / 310

11 - 6
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.2 Operation Setting (Settings Regarding Operation)
11.2 Operation Setting (Settings Regarding Operation)
11.2.1 Operation setting functions
Setting regarding GOT operation can be set.
The items which can be set are described below. Touching the each item part makes the respective setting become
possible.
*1 Relation between the [Key sensitivity] setting and [Key reaction speed]
The larger the set value in [Key sensitivity] is, the shorter the time taken from touching the touch panel until the GOT responds
becomes.
E.g. decrease the value set for [Key sensitivity] when double-touch is made when touching the GOT screen only once. (Decrease
the reaction speed.)
The relation between the [Key sensitivity] setting and [Key reaction speed] is as follows.
POINT POINT POINT
Operation setting by GT Designer3
Select [Common Settings] [GOT Environment Settings] [GOT Setup] from GT Designer3 to make the settings
of buzzer sound and buzzer sound at window move.
To change a part of the setting after downloading the project data, change the setting at the display setting of GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Function Description Setting range
Buzzer volume setting Buzzer volume setting can be changed.
OFF/SHORT/LONG
(At factory shipment: SHORT)
Window move buzzer volume setting Whether turn ON/OFF buzzer when move window can be selected.
ON/OFF
(At factory shipment: ON)
Security setting screen change
Security level change screen can be displayed.
11.2.4 Security level change
-
Utility call key screen change
Utility call key setting screen can be displayed.
11.2.5 Utility Call Key Setting
-
Key sensitivity setting
The sensitivity of touch panel when GOT screen is touched can be set.
E.g. a setting can be changed when double-touch is made when touching
the GOT screen only once. (For preventing chattering)
1 to 8
*1
Touch panel calibration
Touch panel reading error can be corrected.
11.2.6 Adjusting the touch panel position (Touch panel calibration)
-
USB mouse/keyboard setting
Set the setting items related with USB mouse/keyboard.
11.2.7 USB mouse/keyboard setting
-
VNC
®
server function setting The authorization guarantee time for the VNC
®
server function can be set.
0 to 3600 seconds
<At factory shipment: 0 seconds>
[Key sensitivity] setting
Quick response Slow response
8 7 6 5 4 3 2 1
[Key reaction speed] -20ms -10ms
0ms
(Standard)
+10ms +20ms +40ms +80ms +120ms