1
This manual describes how to install the centralized controller and wiring. Before installing the controller, read the
section carefully to ensure proper installation.
Safety symbols used in this manual
The following symbols are used in this manual to indicate the type and severity of potential consequences that
may result when given instructions are not followed exactly as stated.
Retain the Installation Manual and the Instruction Book for future reference. Make sure both the Installation
Manual and the Instruction Book are given to any future air condition system users.
WARNING
Indicates a risk of death or serious injury.
CAUTION
Indicates a risk of injury or damage to the controller.
WARNING
CAUTION
1
Safety Precautions
1
Safety Precautions
The controller must be professionally installed.
Improper installation by an unqualified person may
result in electric shock or fire.
Make sure the controller is securely mounted so
that it will not fall.
Only use specified cables. Securely connect
each cable so that the weight of the cable is not
applied to the connectors.
Loose or improper connections may result in heat
generation or fire.
Do not attempt to modify or repair the controller.
Modification or improper repair may result in electric
shock or fire.
Consult your dealer when repairs are necessary.
Securely install the controller according to the
installation manual.
Improper installation may result in electric shock or
fire.
Electric work must be perform by authorized
personnel according to the local regulations and
the instructions detailed in the installation
manual.
Inadequate circuit capacity or improper installation
may result in electric shock or fire.
Ask your dealer or an authorized technician to
move the controller.
Improper installation may result in electric shock or
fire or damage to the controller.
This appliance must be grounded.
Make sure to install a ground wire.
Do not connect the ground wire to gas or water
pipes, lightning conductors or telephone grounding
lines.
Improper grounding may cause an electric shock.
Do not install the controller where there is a risk
of flammable gas.
If the leaked gas accumulates around the controller,
it may ignite and cause an explosion.
Do not use the controller in an environment high
in oil, steam, or sulfuric gas.
These substances may have adverse effects on the
performance of the controller or damage its parts.
Do not install this controller where the ambient
temperature exceeds 104ºF (40ºC) or drops
below 32ºF (0ºC).
To prevent the controller from being damaged and
malfunctioning, install it away from direct sunlight.
Do not install this controller in a place that has
the potential for steam or condensate formation.
Steam or condensate formation may cause an
electric shock or a unit malfunction.
