2 System Configuration and Connecting Procedure
2.2 Connecting Procedure
9
FX-USB-AW/FX
3U
-USB-BD USER'S MANUAL
USB Driver Installation Edition
1
O
utl
ine an
d
Specifi
cations
2
System
Config
and C
onnecting
Procedure
3
Dri
ver
Install
ation
4
Ins
tallati
on
C
onfi
rma
tion of
Dr
ive
r
5
U
nin
stall
ing
Dr
ive
r
6
Cauti
on on U
se
7
Tro
ubl
eshooti
ng
2.2
Connecting Procedure
2.2.1
Connecting Procedure of the FX-USB-AW
1) Power off the PLC.
2) Connect the USB (Mini-B plug male) connector of the USB cable to the FX-USB-AW.
3) Connect the RS-422 (Mini-DIN 8Pin male) connector of the FX-USB-AW to the PLC.
4) Connect the USB (A plug male) connector of the USB cable to the personal computer.
5) Power ON the PLC.
6) Power ON the personal computer.
7) Make sure the POWER lamp of the FX-USB-AW is lit.
(The POWER lamp of FX-USB-AW lights up when power is supplied normally by the personal computer.)
2.2.2
Connecting Procedure of the FX
3U
-USB-BD
1) Power off the PLC.
2) Connect the USB (Mini-B plug male) connector of the USB cable to the FX
3U
-USB-BD.
3) Connect the USB (A plug male) connector of the USB cable to the personal computer.
4) Turn ON the power supply of the PLC.
5) Turn ON the power supply of the personal computer.
