2 System Configuration and Connecting Procedure
2.1 System Configuration
8
FX-USB-AW/FX
3U
-USB-BD USER'S MANUAL
USB Driver Installation Edition
2. System Configuration and Connecting Procedure
2.1
System Configuration
For details of the programming communication, refer to the following manual.
→
Refer to the FX Series User's Manual - Data Communication Edition
2.1.1
FX-USB-AW
*1.
FX
1NC
Series PLC specification details for I/O, wiring, installation, and maintenance can only be found
in the Japanese Manual.
•
Please refer to individual PLC manuals for PLCs not mentioned above.
2.1.2
FX
3U
-USB-BD
Connected equipment
Baud rate
Cable for personal computer connection
Programmable controller
FX
0
, FX
0S
, FX
0N
, FX
1S
9.6 kbps
USB cable of 5m (196.9") at most
(Included cable is 3m (118.1"))
FX
1N
, FX
1NC
*
1
19.2 kbps or less
FX
2N
(Earlier than Ver. 3.00),
FX
2NC
(Earlier than Ver. 3.00)
9.6 kbps
FX
2N
(Ver. 3.00 or later),
FX
2NC
(Ver. 3.00 or later)
19.2 kbps or less
FX
3U
, FX
3UC
115.2 kbps or less
Positioning unit
FX
2N
-10GM, FX
2N
-20GM
9.6 kbps
Programmable cam switch
FX
2N
-1RM-E-SET
9.6 kbps
Connected equipment
Baud rate
Cable for personal computer connection
Programmable controller
FX
3U
115.2 kbps or less
USB cable of 5m (196.9") at most
(Included cable is 3m (118.1"))
FX
3UC
-32MT-LT(-2)
- PLC
- Positioning unit
- Programmable cam switch
FX-USB-AW
Personal
computer
+
Connect to the
programming port
USB driver
software
Install
USB
port
USB cable for personal computer
connection (included with the product)
- PLC
+ FX
3U
-USB-BD
Personal
computer
USB cable for personal computer
connection (included with the product)
USB driver
software
Install
USB
port
