1
Enclosure surface operation panel
FR-PA07
INSTRUCTION MANUAL
INVERTER
Thank you for purchasing the enclosure surface operation panel (FR-PA07). This instruction manual
gives handling information and precautions for use of this product. Incorrect handling might cause
an unexpected fault. Before using this product, please read this manual carefully to use this product
to its optimum performance.
Please forward this instruction manual to the end user.
This product is an option dedicated for the FR-E800 */E700/D700/F700PJ/E700EX/D700-G series.
Refer to the inverter unit's Instruction manual for details on the operation panel functions, operation
methods and handling methods.
* Only the FR-E800 standard model is supported.
1. Connection
• Use the FR-CB20
connection cable. Insert one end of the cable into the PU connector on the
inverter, and the other end into the connection connector on the FR-PA07 along the guides until
the clips click into place. (For the details of the FR-CB20
, refer to the Instruction Manual of the
FR-CB20
.)
• To disconnect the cable, hold down the clip at the cable end and gently pull the connector.
Safety precautions
Do not touch the setting dial or keys with wed hands. Doing so may cause an electric shock.
Do not install and operate the enclosure surface operation panel (FR-PA07) if it is damaged
or has parts missing.
Provide a safety backup device, such as an emergency brake, to protect machines and
product from hazardous conditions if the enclosure surface operation panel (FR-PA07)
becomes faulty.
Static electricity in your body must be discharged before you touch the product. Otherwise
the product may be damaged.
If halogens (including fluorine, chlorine, bromine, and iodine) contained in fumigants for wood
packages enter this product, the product may be damaged. Prevent the entry of fumigant
residuals or use an alternative method such as heat disinfection. Note that sterilization or
disinfection of wood packages should be performed before packing the product.
NOTE
Do not start operation with the inverter front cover removed.
Clip
FR-PA07 (back)
PU connector
Clip
Example: FR-E700
