Mitsubishi Electric FR-F820-00046, Instruction Manual

Page: 698 / 940

(N) Operation via communication and its settings Parameters
5 - 526
Keepalive time (Pr. 1455)
An alive check message (KeepAlive ACK) is sent to a device if the device does not return any response
within the time set in Pr. 1455 "Keepalive time" while a TCP connection is established. When no re-
sponse is returned after the third transmission, the connection will be forced to be closed.
Ethernet IP filtering function (Pr. 1442 to Pr. 1448)
●
Set the IP address range for connectable network devices (Pr. 1442 to Pr. 1448) to limit the
connectable devices. The IP address setting range depends on the settings in Pr. 1443 and Pr. 1446,
Pr. 1444 and Pr. 1447, and Pr. 1445 and Pr. 1448.
(Either of the settings can be larger than the other in Pr. 1443 and Pr. 1446, Pr. 1444 and Pr. 1447,
and Pr. 1445 and Pr. 1448.)
I003109E
Fig. 5-250: Process of Keepalive checking
Example Setting example 1:
In this case, the IP address range in which Ethernet communication is permitted is "192.168.x (1 to
3).xxx (100 to 150)".
I003110A
Fig. 5-251: Ethernet IP filtering function setting example 1
Connected device
Normal communication
KeepAlive ACK (first)
KeepAlive ACK (second)
Inverter
Time
KeepAlive ACK (third)
Timeout (connection close)
Time set in
Pr. 1455
Time set in
Pr. 1455
Time set in
Pr. 1455
Time set in
Pr. 1455
No response
No response
No response
192 168 1 100
ʊ 9999 3 150
Pr. 1442
Ethernet IP address for
filtering
The range is between the
values set in both
parameters.
Pr. 1443 Pr. 1444 Pr. 1445
Pr. 1446 Pr. 1447 Pr. 1448
Filtering range setting for
the Ethernet IP address
The range is between the
values set in both
parameters.