Mitsubishi Electric FR-F720-0.75K to 110K, Instruction Manual

Page: 72 / 335

63
Param
e
te
r List
Parameter list
4
P
ARAME
T
E
R
S
4.2 Parameter list
4.2.1 Parameter list
In the initial setting, only the simple mode parameters are displayed.
Set
Pr. 160 User group read selection
as required.
Parameter Name
Initial
Value Setting
Range
Remarks
160
User group read
selection
9999
9999 Only the simple mode parameters can be displayed.
0
Simple mode and extended mode parameters can be
displayed.
1
Only the parameters registered in the user group can be
displayed.
REMARKS
⋅
The parameters marked  are the simple mode parameters.
⋅
The parameters marked with in the table allow its setting to be changed during operation even if "0" (initial
value) is set in Pr. 77 Parameter write selection .
⋅
Refer to the appendix 2
(page 314)
for instruction codes for communication and availability of parameter clear, all clear, and
parameter copy of each parameter.
⋅
Parameters with have different specifications according to the date assembled. Refer to page 322 to check the
SERIAL number.
Function Parameters Name Setting Range
Minimum
Setting
Increments
Initial
Value
Refer
to
Page
Customer
Setting
Ba
si
c f
un
ct
io
ns
 0
Torque boost 0 to 30% 0.1%
6/4/3/2/
1.5/1%
74
 1
Maximum frequency 0 to 120Hz 0.01Hz 120/60Hz 82
 2
Minimum frequency 0 to 120Hz 0.01Hz 0Hz 82
 3
Base frequency 0 to 400Hz 0.01Hz 60Hz 84
 4
Multi-speed setting (high speed) 0 to 400Hz 0.01Hz 60Hz 88
 5
Multi-speed setting (middle speed) 0 to 400Hz 0.01Hz 30Hz 88
 6
Multi-speed setting (low speed) 0 to 400Hz 0.01Hz 10Hz 88
 7
Acceleration time 0 to 3600/ 360s 0.1/0.01s 5s/15s 96

8
Deceleration time 0 to 3600/ 360s 0.1/0.01s 10s/30s 96
 9
Electronic thermal O/L relay 0 to 500/0 to 3600A 0.01/0.1A
Rated
inverter
current
101
DC in
je
ct
io
n
br
ak
e
10
DC injection brake operation
frequency
0 to 120Hz, 9999 0.01Hz 3Hz 106
11
DC injection brake operation time 0 to 10s 0.1s 0.5s 106
12
DC injection brake operation voltage 0 to 30% 0.1% 4/2/1% 106
⎯ 13
Starting frequency 0 to 60Hz 0.01Hz 0.5Hz 98
⎯ 14
Load pattern selection 0, 1 1 1 86
Jo
g
op
er
at
io
n 15
Jog frequency 0 to 400Hz 0.01Hz 5Hz 90
16
Jog acceleration/deceleration time 0 to 3600/360s 0.1/0.01s 0.5s 90
⎯ 17
MRS input selection 0, 2 1 0 117
⎯ 18
High speed maximum frequency 120 to 400Hz 0.01Hz 120/60Hz 82
⎯
19
Base frequency voltage 0 to 1000V, 8888, 9999 0.1V 9999 84