manualshive.com logo in svg

Mitsubishi Electric FR-F500 Series, Instruction Manual

The Mitsubishi Electric FR-F500 Series is a superior product offering reliable and efficient control for various applications. Enhance your experience and operate with precision by accessing the comprehensive Instruction Manual, available for free download from our website. Explore the incredible functionalities of the FR-F500 Series today.

Share
Download
background image

SPECIFICATIONS

189

6.1.2 Common specifications

Control system

Soft-PWM control/high carrier frequency PWM control (V/F control), Optimum excitation
control

Output frequency range

0.5 to 120Hz

Analog input

0.015Hz/60Hz (terminal 2 input: 12 bits/0 to 10V, 11 bits/0 to 5V, terminal 1 input: 12 bits/-10
to +10V, 11 bits/-5 to +5V)

Frequency
setting
resolution

Digital input

0.01Hz

Frequency accuracy

Within 

±

0.2% of maximum output frequency (25

°

C 

±

10

°

C for analog input, within 0.01% of set

output frequency for digital input

Voltage/frequency
characteristic

Base frequency set as required between 0 and 120Hz. Constant torque or variable torque
pattern can be selected.

Torque boost

Manual and automatic torque boosts

Acceleration/deceleration
time setting

0 to 3600 s (acceleration and deceleration can be set individually), linear or S-pattern
acceleration/deceleration mode can be selected.

DC injection brake

Operation frequency (0 to 120Hz), operation time (0 to 10 s), operation voltage (0 to 30%)
variable

Cont

rol

 s

pec

if

ic

at

ions

Stall prevention operation
level

Operation current level can be set (0 to 150% variable), presence or absence can be selected.

Analog input

0 to 5VDC, 0 to 10VDC, 0 to 

±

10VDC, 4 to 20mADC

Frequency
setting
signal

Digital input

3-digit BCD or 12-bit binary using operation panel or parameter unit (when the FR-A5AX option
is used)

Start signal

Available individually for forward rotation and reverse rotation. Start signal self-holding input (3-
wire input) can be selected.

Multi-speed selection

Up to 7 speeds can be selected. (Each speed can be set between 0 and
120Hz, running speed can be changed during operation from the PU
(FR-DU04/FR-PU04).)

Second acceleration/
deceleration time
selection

0 to 3600 s (up to two different acceleration and deceleration times can be set
individually.)

Jog operation
selection

Provided with jog operation mode select terminal (Note 1)

Current input selection

Input of frequency setting signal 4 to 20mADC (terminal 4) is selected.

Selection of automatic
restart after an
instantaneous power
failure

Selection of whether automatic restart is made or not after an instantaneous
power failure

External thermal relay
input

Thermal relay contact input when the thermal relay provided externally is
used to stop the inverter

FR-HC connection

Inverter operation enable input and instantaneous power failure detection
input

External DC injection
braking start signal

External input for DC injection braking start

PID control valid

Selection for exercising PID control

PU-external operation
switch-over

External selection between PU and external operation

PU operation external
interlock

External interlock switch-over of PU operation

Use Pr. 180
to Pr. 186 for
selection.

Output stop

Instantaneous shut-off of inverter output (frequency, voltage)

Input

 s

ignal

s

Alarm reset

Alarm retained at the activation of protective function is reset.

Operation functions

Maximum/minimum frequency setting, frequency jump operation, external thermal relay input
selection, polarity reversible operation, automatic restart operation after instantaneous power
failure, commercial power supply-inverter switch-over operation, forward/reverse rotation
prevention, operation mode selection, PID control, computer link operation (RS-485)

Operating status

5 different signals can be selected from inverter running, up to frequency, instantaneous power
failure (undervoltage), frequency detection, second frequency detection, during PU operation,
overload alarm, electronic overcurrent protection pre-alarm, zero current detection, PID lower
limit, PID upper limit, PID forward/reverse rotation, commercial power supply-inverter switch-
over MC1, 2, 3, operation ready, fan fault and fin overheat pre-alarm minor fault. Open
collector output.

Alarm (inverter trip)

Contact output...change-over contact (230VAC 0.3A, 30VDC 0.3A) Open collector...alarm
code (4 bit) output

Operat

ional

 s

pec

if

ic

at

ions

Out

put

 s

ignal

s

For meter

1 signal can be selected from output frequency, motor current (steady or peak value), output
voltage, frequency setting, running speed, converter output voltage (steady or peak value),
electronic overcurrent protection load factor, input power, output power, load meter and
reference voltage output. Pulse train output (1440 pulses/s/full scale) and analog output (0 to
10VDC).

Summary of Contents for FR-F500 Series






























































































































































































































Reviews:

No comments

Related manuals for FR-F500 Series

ABB ACSM1 Series Firmware Manual preview
ACSM1 Series
Brand: ABB Pages: 334
BAREL HFX LED Technical Product Information preview
HFX LED
Brand: BAREL Pages: 8
Sprint Electric Option CON113 Product Manual preview
Option CON113
Brand: Sprint Electric Pages: 8
Plextor 401240SE Installation And User Manual preview
401240SE
Brand: Plextor Pages: 64
Danfoss 176F6492 Installation Instructions Manual preview
176F6492
Brand: Danfoss Pages: 12
Ricoh MP9120A User Manual preview
MP9120A
Brand: Ricoh Pages: 38
Daikin VLT DAA101 Quick Manual preview
VLT DAA101
Brand: Daikin Pages: 39
Fröling FBR-G Installation And Operating Instructions Manual preview
FBR-G
Brand: Fröling Pages: 44
Omron SGDV Series Brochure preview
SGDV Series
Brand: Omron Pages: 48
Lenze L-force i700 Mounting Instructions preview
L-force i700
Brand: Lenze Pages: 8
Infranor GD1-400/05 Installation Manual preview
GD1-400/05
Brand: Infranor Pages: 56
Allen-Bradley 25-JBAA Installation Instructions preview
25-JBAA
Brand: Allen-Bradley Pages: 2
ITT Industries PumpSmart PS200 Configuration & Operation Manual preview
PumpSmart PS200
Brand: ITT Industries Pages: 159
LinMot E User Manual preview
E
Brand: LinMot Pages: 91
Acoms AS17 Technical Note preview
AS17
Brand: Acoms Pages: 4
IBM Power System 9223-42H Instructions Manual preview
Power System 9223-42H
Brand: IBM Pages: 32
Teac CD-56S Installation Manual preview
CD-56S
Brand: Teac Pages: 7
Panasonic CF-VDRRT3W Operating Instructions Manual preview
CF-VDRRT3W
Brand: Panasonic Pages: 76

Brands by name

Popular brands

Load more brands