54
RY2
High-speed operation command (terminal RH function)
• Functions assigned to terminals RH, RM, RL, JOG, RT, AU, CS,
MRS, STOP and RES are activated.
• Signal names are initial values. Using
Pr.180 to Pr.189
, you
can change input signal functions. Note that some of signals do
not accept a command from the network according to the
Pr.338 and Pr.339
settings. For example, RYB reset (terminal
RES function) cannot be controlled via network. Refer to the
Instruction Manual (Detailed) of the inverter for the details of
Pr.180 to Pr.189, Pr.338, and Pr.339
.
RY3
Middle-speed operation command (terminal RM function)
RY4
Low-speed operation command (terminal RL function)
RY5
Jog operation command (terminal JOG function)
RY6
Second function selection (terminal RT function)
RY7
Current input selection (terminal AU function)
RY8
Selection of automatic restart after instantaneous power failure
(terminal CS function)
RY9
Output stop (terminal MRS function)
RYA
Start self-holding selection (terminal STOP function)
RYB
Reset (RES terminal function)
Device
No.
Signal
Description
