Mitsubishi Electric FR-A700 EC, Instruction Manual

Page: 123 / 826

Basic settings Simple mode parameter list
FR-A700 EC 5 - 3
5.1.1 Overheat protection of the motor by the inverter
Set this parameter when using a motor other than the Mitsubishi standard motor (SF-JR) and
Mitsubishi constant-torque motor (SF-HRCA). Set the rated motor current in Pr. 9 "Electronic
thermal O/L relay" to protect the motor from overheat.
Refer to appendix A for the rated inverter current value. The initial values of the 00023 and
00038 are set to 85% of the rated inverter current.
The minimum setting increments are 0.01A for the 01800 or less and 0.1A for the 02160 or
more.
쑶
Pr. No. Name Initial Value Setting Range Description
9
Electronic thermal O/L
relay
Rated inverter
output current
01800 or less 0–500A
Set the rated motor current.
02160 or more 0–3600A
Example
쑴
Change the Pr. 9 "Electronic thermal O/L relay" setting to 2.5A (FR-A740-00023-EC)
according to the motor rated current.
I001068E
Fig. 4-1: Setting of the electronic thermal O/L relay
Screen at powering on
The monitor display appears.
Press the PU/EXT key to choose the PU
operation mode.
Press the MODE key to choose the parameter
setting mode.
Turn the digital dial until P.9 (Pr. 9) appears.
Press the SET key to show the currently set value.
The setting 2.3A for 00023 appears.
Turn the digital dial clockwise to change the set
value to "2.5" (2.5A).
Press the SET key to set.
Operation Display
The parameter number
read previously
appears.
Flicker ... Parameter setting complete!
PU indication is lit.
Refer to appendix A
for the rated inverter
current value.
앫
By turning the digital dial, you can read another parameter.
앫
Press the SET key to show the setting again.
앫
Press the SET key twice to show the next parameter.