Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 75 / 274

Graphic Operation Terminal F930GOT HPP Mode 4
4-7
4.3 ACTIVE STATE MONITOR
Up to eight state Nos. in the ON status can be monitored.
This function is valid in the FX Series only.
u u u u
Basic operation
• When there are not state Nos. in the ON status, the message "NO ACTIVE STATE" is dis-
played.
• When the special auxiliary relay M8047 (step ladder monitor valid) is not ON in the
sequence program, the message "M8047 IS NOT ON" is displayed.
• When there are more than eight state Nos. in the ON status, eight Nos. are displayed from
the smallest one in the ascending order. Excessive state Nos. are not displayed.
[ACTIVE STATE MONITOR]
END [ACTIVE STATE MONITOR]
S 100 S 200 S 300
S 400 S 500 S 600
S 800 S 900
1)
The HPP MODE
screen is displayed.
ACTIVE STATE
MONITOR
Select "ACTIVE
STATE MONITOR".
Paragraph 4.1
1) Active state
State Nos. in the ON status are displayed in
the list.