Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 72 / 274

Graphic Operation Terminal F930GOT HPP Mode 4
4-4
4.2.2 Changing of set values and current values of T, C and D
Set values and current values of word devices (T, C, D, V and Z) in the PLC can be changed.
u u u u
Basic operation
n n n n
Important point
1) Changing of set values of T and C and file registers
They can be changed when a RAM is used as the memory in the PLC.
They cannot be changed when an EPROM or EEPROM cassette is used.
T/C/D monitor
display
Move the cursor
to a device to
be changed.
SET
Change the
set value of
T and C. Change the
current value
of D, T and C.
*1
-
Enter the
minus (-)
sign.
0 to 9
Enter a
numeric.
ENT
Execute
change.
*1 When the SET key is pressed, the numeric input keyboard is displayed.
Numeric (decimal) input keyboard
Read the values
using the procedure
described in the
previous paragraph.
0 1 -
2 3 5 4
6 7 8 9
ENT
CLR
The entered numeric is displayed.
,