Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 252 / 274

Graphic Operation Terminal F930GOT Additional Functions (in V.2.00 or later) 13
13-4
13.2.4 Write to PLC
Set word devices in the PLC to which ASCII codes of the bar code reader are written from the
GOT.
Set the word devices using the screen creation software.
- SW
o
D5C-GOTRE-PACK
Set word devices in "Bar Code Reader" in "Common Setting".
- FX-PCS-DU/WIN-E
Set word devices in "Bar Code Setting" in "System Setting" in "View".
• Specification of word devices
* When the FX Series PLC is connected, C200 to C255 are not available.
• Number of devices (number of specified words)
One word stores two characters of the ASCC code data sent from the bar code reader.
Two to 32 word devices can be specified.
• Example of storage
The ASCII code data from the bar code reader is stored in the word devices specified
above.
If the read data is smaller than the specified number of devices, space (20H) is stored in
unused word devices.
Example: Data read from bar code reader: 1234567
Head device of write destination : D100
Number of devices: 6
On the contrary, if the read data is larger than the specified number of devices, the exces-
sive data is not stored.
Write destination device Stored data ASCII code
D100 7
D101 H3231 21
D102 H3433 43
D103 H3635 65
D104 H2037 7
Space (20H) is stored after "7".
D105 H2020
D, T, C, GD : FX Series
D, W, TN, CN, R, Z, V, GD : A Series
When connecting a PLC manufactured by
another company, specify word devices suit-
able to the connected PLC.