Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 250 / 274

Graphic Operation Terminal F930GOT Additional Functions (in V.2.00 or later) 13
13-2
13.2 Connection of bar code reader
13.2.1 Connection
* A bar code reader is connected to the RS-232C connector. Accordingly, the printout function
or the two-port interface function cannot be used together with a bar code reader.
If the F930GOT is connected to the PLC via RS-232C, the bar code reader connection func-
tion is not available.
13.2.2 Communication specifications
The F930GOT can be connected to a bar code reader which satisfies the communication
specifications and the communication format shown below.
• Communication specifications
• Communication format
Data : ASCII code
Header : None
End code : CR (0DH)
Communication port RS232C
Baud rate 9600 bps
Data length 8 bits
Stop bit length 1 bit
Parity Even
Data CR (0DH)
5
4
3
2
1
9
8
7
6
9:

1:Unused
2:RD(RXD)
3:SD(TXD)
4:DTR
5:SG 6:DSR
7:RTS
8:CTS
• System configuration • Connection
F930GOT: RS-232C connector