Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 20 / 274

Graphic Operation Terminal F930GOT Introduction 1
1-6
1.4 Expressions and basic operations of operation keys
The operation keys are expressed as follows in the text.
1.4.1 Expressions of operation keys
1) Touch keys on the screen which are actuated when touched by fingers are enclosed with
rectangular frame.
2) Cursor control keys to be pressed may be expressed as follows.
3) When a same key is pressed several times or a same operation is repeated, the following
expression may be used.
4) When an arbitrary numeric within the range of 0 to 9 is to be entered, the following expres-
sion may be used.
1.4.2 Basic operations
The common operations in the GOT are shown below.
SCREEN MODE , HPP MODE
, ,
0 to 9
➀
➆
➁
➆ ➇
0
2
6
CLR
1
3
7
4
8
5
9
ENT -
OFF ON SET DEV.
END [DEVICE MONITOR]
➃ ➅
➈
➄
➂
➀
Function display
The selected mode or function is displayed
here.
➁
END key
This key terminates the displayed function, and
returns to the previous screen.
➂
CLR (clear) key
This key cancels the input of alphabets and
numerics.
➃
ENT (enter) key
This key determines the input of alphabets and
numerics.
➄
Ten-key pad
This pad allows to enter numerics.
➅
- (minus) key
➆
▲
and
▼
(cursor control) keys
➇
SET key
When this key is pressed after an alphabet or
numeric has been entered, the keyboard is dis-
played.
➈
Input display
This field displays a value input from keys.