Mitsubishi Electric F920GOT-BBD-K-E, Hardware Manual

Page: 138 / 592

GOT-F900 SERIES (CONNECTION) Installation and Wiring of Handy GOT 5
5-36
5.9.2 Preparation of Operation Switch Name Sheet
This section explains how to prepare the operation switch name sheet.
1) Preparing the name sheet
a) Use a name sheet and an OHP sheet (transparent sheet) offered as accessories.
b) The mount sheet is of actual dimensions.
If you would like to make additional mount sheets, refer to the following dimensions.
c) When the work in b) is completed, copy the contents of the name sheet base on an OHP sheet in
the actual dimensions (100%) using a copy machine.
When using a different OHP sheet, use the following type. Make sure that the selected OHP
sheet can be used in a copy specification.
[Recommended OHP sheet]
Material: Polyester film
Thickness: 0.1mm (0.004")
K e y c e n t e r
( p r i n t c e n t e r )
S h e e t i n s e r t i o n d i r e c t i o n
1 2 2 2 2 2 2 2 ( 1 8 )
9 6 ( 3 . 7 8 " )
10
C 2
( 0 .
0 8
" )
20
+0 -1
D i a m e t e r = 1 7 ( 0 . 6 7 " )
: E f f e c t i v e r a n g e f o r c h a r a c t e r s
(0
.3
9"
)
( 0 . 4 7 " ) ( 0 . 8 7 " )
( 0 . 8 7 " )
( 0 . 8 7 " )
0.
79
+0 -0
.0
4
U n i t : m m ( i n c h e s )
( 0 . 7 1 " )