59
7.6 Setting of Control Method
You will set the control type of the system.
(1) Click the
Set control method
button in the setting menu.
(2) The following message appears.
Select a control type from the pull-down menu and then click the
Register
button.
*When the control type is changed, the following message appears.
To continue the current setting, click the
Yes
button. Note that in this case, the control settings before change is deleted.
To cancel the setting change of control type not to delete the currently registered settings, click the
No
button.
(3) The window appears to set the settings for the control type you have selected.
For details on each control type settings, refer to the following:
・
Interlocking control
…
・
Compressor control
…
・
Schedule control
…
The current control type
<Control type>
・
Interlocking control
・
Compressor control
・
Schedule control
