50
7. Setting Operation
The control unit settings are conducted from Control Unit Engineering Tool.
This chapter describes the system management window and setting menu related to settings about control.
7.1
System Management
On the following window, you will register, change, or delete the system.
Each operation of setting, monitoring, and maintenance is executed on a registered system basis.
Click the following appropriate tab to move to the screen for each operation.
Registering/Changing the System Information
(1) Select an ID to register or to change the system name.
The selected line is displayed in blue.
①
②
③
④
Button name
Details
Reference
①
Setting menu
Open the setting menu such as terminal or control setting
②
Maintenance menu
Open the maintenance menu such as clock setting or
firmware update.
③
Measurement value
monitoring
Open the window to monitor the measurement values
measured by the extension unit connected to the parent
terminal of control unit.
④
Control monitoring
Open the window to monitor the control status in the system
or to manually control.
