Mitsubishi Electric City Multi PKFY-P06NAMU-E Page 45 Technical & Service Manual Download

Page: 45 / 64

PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E

OPERATING PROCEDURE

PHOTOS & ILLUSTRATION

Metal fixture

Screws

1. Removing the lower side of the indoor unit from the

installation plate

(1) Remove the 2 screws.

Hang the indoor unit hangers to the catches on the instal-
lation plate.

Hanger of indoor unit

Catch of installation plate

2. Removing the right side panel

(1) Remove the 2 screws of the right side panel: one on the

bottom and the other on the upper right-hand side.

(2) Sliding the right side panel to the right, pull it out toward

you.

Terminal cover

Electrical parts box cover

Indoor controller
board

Right side panel

3. Removing the indoor controller board

(1) Remove the right side panel.
(2) Remove the screw of the electrical parts box cover, and

remove the cover.

(3) Disconnect the connectors on the indoor controller board.
(4) To unhook the catches on the right-hand side of the

indoor controller board, pull the left-hand side toward you
and lift up the cover to the right. Then the indoor control-
ler board can be removed.

4. Removing the electrical parts box

(1) Remove the right side panel.
(2) Remove the screw of the electrical parts box cover and

controller cover, and remove each the cover.

(3) Disconnect the vane motor, the linear expansion valve,

the room temperature thermistor, the liquid pipe temperature
thermistor and the gas pipe temperature thermistor connec-
tor on the indoor controller board.

(4) Remove the 2 screws of the electrical parts box.
(5) Disconnect the connector of the fan motor lead wire. (Fan

motor side)

(6) Remove the electrical parts box.

Figure 1

Figure 2

Photo 1

Photo 2

Catches

Room temperature thermistor

Electrical

parts box

Electrical

parts box

Indoor controller

board

Screws

Summary of Contents for City Multi PKFY-P06NAMU-E

































































Search results

Summary of Contents for City Multi PKFY-P06NAMU-E

Reviews:

Related manuals for City Multi PKFY-P06NAMU-E

Brands by name

Popular brands

Mitsubishi Electric City Multi PKFY-P06NAMU-E, Technical & Service Manual

Search results

Summary of Contents for City Multi PKFY-P06NAMU-E

Reviews:

Related manuals for City Multi PKFY-P06NAMU-E

Brands by name

Popular brands