Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, User Manual, Page: 61 / 162

6 Parameter Setting
6.4 IO-Link Device Parameter Setting
59
6
Conversion procedure of IODD
The following describes how to convert IODD.
Conversion procedure
1.
Store IODD to the hard disk on the personal computer.
2.
Start IODD DTM Configurator. Device DTM already converted to IODD is listed on the window. (If no Device DTM
already converted to IODD has been added, the list is blank.)
3.
Click the [Add IODD ...] button.
4.
Select the XML file of IODD to be read, and click the [Open] button.
5.
Check that IODD is added properly, and click the [Close] button. IODD will be converted to Device DTM.