Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, User Manual

Page: 23 / 162

2 SPECIFICATIONS
2.2 Performance Specifications
21
2
2.2
Performance Specifications
NZ2GF12A-60IOLH8 IO-Link module
Item NZ2GF12A-60IOLH8
Module type CC-Link IE Field Network Intelligent device station
IO-Link IO-Link master
Isolation method Non-isolation
Protection degree IP67
Wiring method for common 1 common
Surge suppressor Zener diode
Fuse Module: Not available
Channel: Available
Protection function Overload protection
function Overcurrent is detectable on the CQ, Q, and L+ terminals on each channel.
External interface Module power supply part 7/8" waterproof connector, 5 pins, male/female
I/O part M12 waterproof connector, 5 pins, female, A-code
Communication part M12 waterproof connector, 8 pins, female, X-code
Channel setting The following 3 modes are available.
• IO-Link mode
• SIO mode (digital input) (default)
• SIO mode (digital output)
IO-Link mode Supported protocol v1.12
Number of channels 8 channels max.
Max. load current (CQ) 500mA/channel, 9A/common
Max. load current (L+) 1.3A/channel, 9A/common
Transmission speed • 4.8kbaud (COM1)
• 38.4kbaud (COM2)
• 230.4kbaud (COM3)
Determined by the IO-Link device connected.
SIO mode (CQ)
(digital input) Number of points 8 points max.
Input type Negative common (source type)
Rated input current IEC 61131-2 Type3
Input resistance IEC 61131-2 Type3
ON voltage/ON current 11VDC or more/15mA or more
OFF voltage/OFF current 5.0VDC or less/1.5mA or less
Input response time
(OFF

ON)
0.1ms or less (excluding the internal processing time)
Input response time
(ON

OFF)
0.1ms or less (excluding the internal processing time)
SIO mode (CQ)
(digital output) Number of points 8 points max.
Output type Source type
Max. load current 2A/point, 9A/common
Max. inrush current 17A (25

, 150

s or less)
Leakage current at OFF 5

A or less
Max. voltage drop at ON 0.85VDC, 2.0A
Output response time
(OFF

ON)
80

s or less
Output response time
(ON

OFF)
150

s or less