Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, User Manual

Page: 19 / 162

1 PART NAMES
17
1
Operation specifications of the display part
The display part is used to check information or directly set the station number and network number of the IO-Link module
without having to use engineering tools.
When an error occurs, error information is displayed to help users to troubleshoot the module.
■
Display at startup
Information is displayed in the following order when the module is powered on.
■
Main menu
Window transition of the main menu is as follows. Use the [SET] button to change the main menu.
No. Name Description
(1) [SET] button Used to change the main menu and determine changes of various settings.
Press and hold it to activate the Edit mode. In the edit mode, display lock (RY22) can be used to lock any operation. In the
locked state, a key icon is displayed on the LCD screen.
(2) [SEL.] button Used to change the display for network configuration and module information, and move the cursor between digits of a value.
(3) LCD screen Displays information of the IO-Link module.
The standby screen (IO-Link module station number) will appear if there is no operation for 10 seconds.
(1) The model name is displayed.
(2) The hardware and firmware versions are displayed.
(3) The station number is displayed.
(4) The network number is displayed.
(1) Standby screen: Displays the station number of the IO-Link module.
(2) Network configuration window: Used to configure the network.
(3) Module information window: Used to read information such as errors.
(4) Initialization window: Used to reset the settings to the factory default values.
(1) (2)
(3)
(1) (2) (3) (4)
(1) (2)
SET
SET
SET SET
(3) (4)