Mitsubishi Electric CC-Link-AnyWire Bitty Bridge, User Manual

Page: 12 / 74

10
TERMS
Unless otherwise specified, this manual uses the following terms.
Term Description
AnyWire Bitty
This system provides a high-speed and highly-reliable sensor network. An original transmission
system provided by Anywire Corporation. This module supplies power using a transmission line,
minimizing wiring for machines and equipment.
Buffer memory
A memory in an intelligent function module, where data (such as setting values and monitoring values)
exchanged with a CPU module are stored
GX Developer
The product name of the software package for the MELSEC programmable controllers
GX Works2
Intelligent function module
A Q-series module other than CPU modules, power supply modules, and I/O modules, which is
mounted on a base unit
Master module
A module that controls a data link system.
One master module is required for one system.
NZ2AW1C1BY The abbreviation for the CC-Link-AnyWire Bitty bridge module, NZ2AW1C1BY
Programming tool A generic term for GX Works2 and GX Developer
Remote I/O module A remote module that exchanges I/O signals (bit data) with an external device
RWr
Remote register (read area for CC-Link).
Information input in 16-bit units from the slave station to the master station.
RWw
Remote register (write area for CC-Link).
Information output in 16-bit units from the master station to the slave station.
RX
Remote input (for CC-Link).
Information input in bit units from the slave station to the master station.
RY
Remote output (for CC-Link).
Information output in bit units from the master station to the slave station.
Slave module A generic term for modules that communicate data with a bridge module
Terminating unit A waveform shaper
Transmission cycle time A data sampling interval