Mitsubishi Electric AnyWire ASLINK, User Manual

Page: 165 / 200

APPX
Appendix 3 Remote Buffer Memory
163
A
Parameter area initialization completion
■
Address
■ Description
This area indicates the initialization completion status of the parameter information stored in the non-volatile memory.
(1) 0: Not executed, 1: Completed
When the initialization of the parameter information is completed, b0 becomes 1: Completed. (The initial value is set to 0: Not
executed.)
For details, refer to the following.

Page 162 Parameter area initialization command
Slave parameter storage area
■
Address
■
Description
Parameters of each ID are stored in 1000H to 3FFFH.
The following table lists the assignment of the remote buffer memory addresses.
The first word of the 48 words indicates the ID, and the data is arranged in ascending order of ID in units of 48
words.
When adding a slave module or changing the ID, perform the automatic address detection function again.

Page 53 Automatic Address Detection Function
Name Address
Parameter area initialization completion 0403H
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
0 (1)
Name Address
Slave parameter storage area 1000H to 3FFFH
Address Name Details
1000H to 102FH Parameter area 1st module (48 words) The parameter area of each ID has 48 words and can
store information of up to 256 parameters.
1030H to 105FH Parameter area 2nd module (48 words)
 
3FA0H to 3FCFH Parameter area 255th module (48 words)
3FD0H to 3FFFH Parameter area 256th module (48 words)