Mitsubishi Electric AnyWire ASLINK, User Manual

Page: 129 / 200

APPX
Appendix 1 Remote I/O Signals
127
A
APPENDICES
Appendix 1
Remote I/O Signals
List of remote I/O signals
The following table lists the I/O signals for the master/local module.
For the assignment of the I/O signals, an example of assigning the remote I/O signals of the NZ2AW1GNAL to RX0 to RX21F
and RY0 to RY21F is described.
The remote input (RX) is an input signal from the NZ2AW1GNAL to the master/local module.
The remote output (RY) is an output signal from the master/local module to the NZ2AW1GNAL.
Do not use any remote I/O signals whose use is prohibited. Doing so may result in an accident due to an
incorrect output or malfunction.