5
*1
Factory setting is -10 to 10V.
*2
The accuracy does not apply when noise exists.
Noise immunity
Noise voltage : 500Vp-p, tested by noise simulator of noise width
of 1 s and noise frequency of 25 to 60Hz
External
wiring
system
Système
de
câblage
externe
Communication
part, module
power supply
part
Partie
communication,
Partie
alimentation du
module
7-point 2-piece terminal block
M3 5.2 Tightening torque: 0.59 to 0.88N•m
Applicable solderless terminal: 2 or less
Plaque à bornes 7-points deux pièces
M3 5,2 Couple de serrage : 0,59 à 0,88 N•m
Borne sans soudure à utiliser : 2 ou moins
I/O part
Partie entrée/
sortie
18-point two-piece terminal block
M3 5.2 Tightening torque: 0.59 to 0.88N•m
Applicable solderless terminal: 2 or less
Plaque à bornes 18-points à montage direct
M3 5,2 Couple de serrage : 0,59 à 0,88 N•m
Borne sans soudure à utiliser : 2 ou moins
Applicable wire size
Taille du fil à utiliser
0.3 to 2.0mm
2
0,3 à 2,0 mm
2
Applicable solderless
terminal
Borne sans soudure à
utiliser
• RAV1.25-3 (conforming to JIS C 2805)
[Applicable wire size :0.3 to 1.25mm
2
]
• V2-MS3, RAP2-3SL, TGV2-3N
[Applicable wire size: 1.25 to 2.0mm
2
]
• RAV1.25-3 (conforme à la norme JIS C 2805)
[Taille de fil à utiliser : 0,3 à 1,25mm
2
]
• V2-MS3, RAP2-3SL, TGV2-3N
[Taille de fil à utiliser : 1,25 à 2,0mm
2
]
Module fixing screw
M4 screw 0.7mm 16mm or larger
(tightening torque range: 0.78 to 1.08N•m)
DIN-rail mounting is also possible.
Applicable DIN rail
TH35-7.5Fe, TH35-7.5Al (Compliant with IEC 60715)
External power supply
24V DC (Ripple ratio: within 5%)
(Allowable voltage range 20.4 to 28.8V DC)
Inlush current: 2.6A, 3.2ms or shorter
Current consumption: 0.24A (24V DC)
Weight
0.25kg
Table 2.2 Performance specifications
Item
AJ65SBT2B-64DA
