manualshive.com logo in svg

Mitsubishi Electric AE-200A, Instruction Book

Share
Download
Mitsubishi Electric AE-200A Instruction Book Download Page 135

135

WT07996X02

1-2-3. Target Value

On the Target Value screen, target values that are displayed in the graph on the Energy Use Status screen and the 

Ranking screen can be checked.

Based on the total annual electric energy consumption, target values for each month, each day of the week, and 

each block are set.

Click [Energy Mgmt] in the menu, and then click [Target Value] to access the Target Value screen.

 

    Note:  Target value settings can be configured on the AE-200/AE-50’s LCD or the AE-200/AE-50/EW-50’s Web Browser for System 

Maintenance Engineer.

 

    Note:  Block registration is required for the air conditioning unit groups to be managed by tenant managers.

(1)  Check the annual target electric energy value.

Item

Description

Annual target electric 

energy

The annual target electric energy consumption value is displayed.

Actual electric energy 

consumption of the 

previous year

The electric energy actually consumed in the previous year is displayed.

Comparison with 

previous year

The ratio of the annual target electric energy of the current year to the electric energy consumed 

in the previous year is displayed.

 

Note:  If there are results for the previous year, then at the new year, a comparison of the previous 

year’s annual target electric energy and results will be displayed.

Total target value

Monthly target

Target value for each 

block

Comparison with previous 

year

Actual electric energy 

consumption of the 

previous year

Annual target

For tenant managers

Chapter 3

Summary of Contents for AE-200A

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands