Mitsubishi Electric 800 Series, Instruction Manual, Page: 403 / 727

(T) Multi-Function Input Terminal Parameters
402
PARAMETERS
5.12.5
Frequency setting voltage (current) bias and
gain
The degree (incline) of the output frequency to the frequency setting signal (0 to 5 VDC, 0 to 10 V or 4 to 20 mA) is
selectable to a desired amount.
Use
Pr.73 Analog input selection , Pr.267 Terminal 4 input selection , or the voltage/current input switch to switch
among input 0 to 5 VDC, 0 to 10 V, and 4 to 20 mA. (Refer to page 393 )
Pr. Name Initial value
Setting
range
Description
902
T200 Terminal 2 frequency setting
bias frequency
0 Hz 0 to 590 Hz Set the terminal 2 input bias side frequency.
902
T201 Terminal 2 frequency setting
bias
0% 0 to 300%
Set the converted % on the bias side voltage
(current) of the terminal 2 input.
125
T022 903
T202 Terminal 2 frequency setting
gain frequency
60 Hz 0 to 590 Hz Set the terminal 2 input gain (maximum) frequency.
903
T203 Terminal 2 frequency setting
gain
100% 0 to 300%
Set the converted % on the gain side voltage
(current) of the terminal 2 input.
904
T400 Terminal 4 frequency setting
bias frequency
0 Hz 0 to 590 Hz Set the terminal 4 input bias side frequency.
904
T401 Terminal 4 frequency setting
bias
20% 0 to 300%
Set the converted % on the bias side current
(voltage) of terminal 4 input.
126
T042 905
T402 Terminal 4 frequency setting
gain frequency
60 Hz 0 to 590 Hz Set the terminal 4 input gain (maximum) frequency.
905
T403 Terminal 4 frequency setting
gain
100% 0 to 300%
Set the converted % on gain side current (voltage)
of terminal 4 input.
917
T100 Terminal 1 bias frequency
(speed)
0 Hz 0 to 590 Hz
Set the terminal 1 input bias side frequency
(speed). (speed limit)
917
T101
Terminal 1 bias (speed)
0% 0 to 300%
Set the converted % on bias side voltage of
terminal 1 input. (speed limit)
918
T102 Terminal 1 gain frequency
(speed)
60 Hz 0 to 590 Hz
Set the terminal 1 input gain (maximum) frequency
(speed). (speed limit)
918
T103
Terminal 1 gain (speed)
100% 0 to 300%
Set the converted % on the gain side voltage of
terminal 1 input. (speed limit)
241
M043 Analog input display unit
switchover
0
0 % display
Select the unit for analog input
display
1 V/mA display