Mitsubishi Electric 800 Series, Instruction Manual, Page: 242 / 727

(E) Environment setting parameters
PARAMETERS
241
5
GROUP
E
5.7
(E) Environment setting parameters
Purpose Parameter to set
Refer to
page
To set the time Real time clock function
P.E030 to
P.E032 Pr.1006 to
Pr.1008
242
To set a limit for the reset function.
To shut off output if the operation
panel disconnects.
To force deceleration to a stop on the
operation panel.
Reset selection/
disconnected PU
detection/PU stop
selection/Reset limit
P.E100 to
P.E102, P.E107
Pr.75 244
To select the display language of the
parameter unit PU display language
selection
P.E103 Pr.145 247
To control the buzzer of the
parameter unit and operation panel
PU buzzer control P.E104 Pr.990 247
To adjust the LCD contrast of the
parameter unit
PU contrast adjustment P.E105 Pr.991 248
To switch the monitor display of the
operation panel to the PID set point
setting screen by simply turning the
setting dial
Extended direct setting P.E108 Pr.1000 248
To use the USB memory USB host reset P.E110 Pr.1049 249
To use the regeneration unit to
increase the motor braking torque Regenerative brake
selection
P.E300, P.G107 Pr.30, Pr.70 608
To change the overload current rating
specification
Multiple rating setting P.E301 Pr.570 249
To prevent parameter rewriting
Parameter write disable
selection
P.E400 Pr.77 251
To restrict parameters with a
password
Password function P.E410, P.E411 Pr.296, Pr.297 253
To use parameters freely Free parameter P.E420, P.E421 Pr.888, Pr.889 255
To change parameter settings for an
IPM motor as a batch IPM parameter
initialization
P.E430 Pr.998 145
To set multiple parameters as a batch
Automatic parameter
setting
P.E431 Pr.999 255
To display the required parameters
Applicable parameter
display and user group
function
P.E440 to
P.E443 Pr.160,
Pr.172 to Pr.174
259
To release the parameter copy
warning (CP) Parameter copy alarm
release
P.E490 Pr.989 260
To reduce the motor noise and EMI
PWM carrier frequency
changing P.E600 to
P.E602 Pr.72, Pr.240,
Pr.260
261
To understand the maintenance time
of inverter parts and peripheral
device
Inverter parts life display
P.E700 to
P.E704
Pr.255 to Pr.259 262
Maintenance output
function P.E710 to
P.E715 Pr.503, Pr.504,
Pr.686 to Pr.689
266
Current average value
monitor signal P.E720 to
P.E722
Pr.555 to Pr.557 267