Mitsubishi Electric 3F-14C-WINE, User Manual, Page: 379 / 646

17-379 17-379
17.2. Restore (PC -> Robot)
You can transfer the backup information on the computer to the robot controller.
Use the restore function while connected to the robot controller.
(1) From the project tree, open the target project [Backup]. In the backup tree, the information backups for "All ",
"Program", "Parameter", and "System program", respectively, is displayed.
Figure 17-9 Backup Project Tree Diagram
(2) Select the information listed on the controller, then click the right mouse button. From the right mouse button
menu, select [Restore].
Figure 17-10 Restore
Caution on individual restoration of individually backed up by
selecting "All"
It is possible to restore each item (Program, Parameter files and System program) of the data
backed up by selecting "All files".
At this time, the data files of the specified item are transferred to the robot controller, without
clearing (initializing) all the information in the robot controller.
Caution