App
- 14
Appendix 3 Usage Condition of Utility Function
Appendix 3 Usage Condition of Utility Function
The function which can be used differs according to the GOT type.
Moreover, there are the function which can be set with drawing software and the function which
cannot be set.
: Applicable
: Not applicable : Not required
(Continued to next page)
Item
Functions overview
GT15
GT
SoftGOT
1000
GT11
Refe-
rence
Communication setting
Assigning channel numbers and communication drivers to
communication interfaces.
Detail
settings
Setting communication parameters
Setting or deleting sequence program protection key words,
canceling sequence program protection status (When
connecting to FX series CPU)
GOT
setup
Display
Setting the startup screen display time and screen saving time
*1
Setting the backlight to ON or OFF during screen saving
Switching message languages
*2
Setting the battery alarm display to ON or OFF
Setting the black and white inversion display to ON or OFF (For
GT15, applicable to only GT1550-Q)
Setting the human sensor (Applicable to only GT1595-X,
GT1585V-S, and GT1585-S)
Adjusting brightness and contrast
Operation
Setting the buzzer volume and window move buzzer
Setting the key sensitivity and key reaction speed
Setting the touch detection mode (Applicable to only GT1595-
X)
Changing security levels
Setting the utility call keys
Adjusting the touch panel (Applicable to only GT1595-X)
Q/QnA ladder
monitor
Setting the data storage location for the MELSEC-Q/QnA
ladder monitor function.(Inapplicable to GT1555-Q and
GT1550-Q)
Transparent
mode
settings
Setting the channel No. to be used for the communication for
the FA transparent function
Video/RGB
Setting
Setting the video display and RGB display (Applicable to only
GT1585V-S and GT1575V-S)
Backup/
restoration
setting
Setting the storage locations for backups and backup settings
