20.3 ERROR MESSAGE AND SYSTEM ALARM
20.3.1 Error Contents Display
20
- 17
17
ADDI
TIO
N
TIMES
RE
SET FOR
MA
INTENA
N
C
E
18
INST
ALL
A
TI
ON OF
B
O
OT
O
S
A
ND
ST
A
N
DA
RD OS
19
MAIN
TE
NANCE A
ND
INSP
ECTIO
N
20
ERROR MESS
AGE
AND SYSTE
M
ALA
R
M
AP
PENDI
C
E
S
IND
E
X
20.3 ERROR MESSAGE AND SYSTEM ALARM
This chapter describes the error message and system alarm displayed in the GOT.
As the error code and error message displaying functions when an error occurs at the GOT, controller or
network, there are two kinds: system alarm and advanced system alarm.
For details of the system alarm and advanced system alarm, refer to the following.
GT Designer2 Version Screen Design Manual
Remark
Error code and channel No.
• Error codes can also be confirmed in the error code storage area of the
system information function.
• The channel No. where an error is occurring can be confirmed with the GOT
special register (GS262 to 264).
For details of the system information and GOT special register, refer to the following
manual.
GT Designer2 Version Screen Design Manual
20.3.1 Error Contents Display
This section describes the example for displaying error code and error message on GOT.
1
Popup-displaying the error code and error message (Advanced alarm popup display
(System alarm))
If an error occurs, the error code and error message can be popup-displayed on the front of the monitor
screen.
As alarms are popup-displayed regardless of the screen type, the error occurred will not be overlooked.
2
Displaying error code and error message in a list (Advanced system alarm display)
If error has occurred, error code and error message can be displayed on the list set with the screen.
Multiple errors can be displayed, or the history of display can be recorded.
A 1254
348
B
A 1254
348
B
04/6/1 13:20 Power module
Pop up generated alarms
regardless of the screen.
04/6/1 8:05
Fuse error
Occurred
Message
Restore
Check
04/6/1 10:25
Temp. error
Create a screen to display alarms, and confirm
the details of the alarms and take measures.
11:25 10:45