13
- 18
13.3 Project Information
13.3.4 Operation of project information
3
Copy operation
Using the A drive and B drive, the following operations are possible.
Copying to another directory in the same drive
Copying between A drive and B drive
Copy to/from C drive is disabled.
(This item explains using the A drive.)
1
Install CF card in the PC, in which create
a folder for the copy destination.
Set the same character with [System
Setting] of [System Environment] of GT
Designer2 for the folder name.
GT Designer2 Version
Screen
Design Manual
(3.1 GOT/Controller Type Setting)
2
Install the CF card mentioned above to
GOT.
Refer to the following for inserting/
removing method of CF card.
3
Open [Project Information] screen to
select the file to copy.
4
If touch
button, the message
[Please select a destination.] is displayed
in the left bottom of the screen.
5
If the copy destination folder is touched,
the screen display is changed to the folder
of copy destination.
At this time, it cannot be copied into the
same folder where the file exists.
Select other folders.
6
If touch
button, the dialog
mentioned left is displayed.
Copy
Next
