9
- 11
9.3 Utility Display
9.3.3 Basic operation of settings change
9.3.3
Basic operation of settings change
1
Change of setting value
1
Touch the select button (setting point) on the screen.
According to the setting item, the button requires selecting setting value, inputting value or displaying
other setting screen.
In the above mentioned screen example, there is no setting item which displays the keyboard. For the
operation of keyboard refer to the next page.
Touching
confirms the numerical input.
When the setting range exists it repeats the numerical without displaying keyboard.
•
Key: It shifts to the setting screen of each setting item when touched.
(Displays the another setting screen.)
2
Setting contents are reflected if
button is touched.
3
If
touch button without touching
button, the dialogue mentioned below is displayed.
Key
: It is a key for selecting the setting value. Repeats with each touch
.
Key : It is a key for inputting the numerical value. It displays the keyboard on the bottom
of the screen when touched.
Setting item
Select button
Setting item Select button
ON
ON
OFF
Numerical
Enter
4800bps 9600bps 19200bps
Example:
Setting...
OK
OK
