Chapter 7 Wireless 2.4GHz
46
7.1.1 No Security
Select the Security Mode to
Open
and
No Security
to allow wireless stations to communicate with
the access points without any data encryption or authentication.
If you do not enable any wireless security on your Router, your network is accessible to any
wireless networking device that is within range.
Figure 7
Wireless 2.4GHz > General: No Security
Operating
Channel
This is the channel currently being used by your AP.
Security Mode
Select
WEP (Basic)
or
WPA(2)/WPA(2)-PSK (More Secure)
to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the Router. When you select to use a security,
additional options appears in this screen.
If you select
Open (No Security)
, the Router allows any client to associate with this
network without any data encryption or authentication.
Table 5
Network Setting > Wireless 2.4GHz > General (continued)
LABEL
DESCRIPTION
