Chapter 25 Remote Management
206
25.3 Telnet Screen
You can use Telnet to access the Device’s command line interface. Specify which interfaces allow
Telnet access and from which IP address the access can come.
Click
Maintenance > Remote MGMT
>
Telnet
tab to display the screen as shown.
Figure 138
Maintenance > Remote MGMT > Telnet
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the Device
using this service.
Select
All
to allow any computer to access the Device using this service.
Choose
Range
to just allow the computers with an IP address in the range that you
specify to access the Device using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 85
Maintenance > Remote MGMT > WWW (continued)
LABEL
DESCRIPTION
