background image

760BPX Premium 

Original Instructions Version June 16

760BPX_2805161

20

5.5 Air Filter

IMPORTANT Cleaning the air filter is essential to guarantee the efficiency and duration of the       
machine. Do not work with a damaged filter or without a filter, as this could permanently dam-
age the engine.

It must be cleaned after every 8 - 10 working hours. Clean 
the filter as follows:

– Loosen the lock knob (10), remove the cover, sponge 
   filter (a) and paper filter (b). 

– Wash the sponge filter with soap and water, then leave 
   the filter to dry in the open air. Do not use petrol or 
   other solvents. 

– Clean the paper filter with pressurised air.

– Refit the sponge filter, paper filter and cover and tighten 
  the lock knob. Make sure the paper filter is on the         
   bottom, and the sponge filter is on the top.

5.6 Checking the Spark Plug

Periodically remove and clean the spark plug 
using a metal brush to get rid of any deposits. 

Check and reset the correct distance between 
the electrodes. 

Replace  the  spark  plug  and  fasten  it  firmly                                
using the supplied wrench. 

The  spark  plug  must  be  replaced  with  one  with  the  same  characteristics  whenever  the                     
electrodes have burnt or the insulation has worn, and in any case every 100 working hours.

Summary of Contents for 760BPX Premium

































Reviews: