760BPX Premium
Original Instructions Version June 16
760BPX_2805161
16
3. Using the Machine
3.1 Starting the Machine
Before starting the engine, place the machine on stable ground and make sure the blow tubes
are not crushed.
3.1.1 Cold starting
A “cold” start of the engine means starting it after at least 10 minutes from when it was switched
off or after refuelling.
1. Set the engine switch lever (8) at the intermediate position “I” (fig. 9).
2. Turn the choke knob (15) clockwise to «CLOSED» position (fig. 10).
3. Press the primer bulb (19) 7 to 10 times to prime the carburettor (fig. 11).
4. Hold the machine firmly with left your hand on the hand grip (1), in order not to lose control
of the machine during starting (fig. 12).
5. Pull the starter handle (16) slowly for 10 - 15 cm until you feel some resistance, then pull it
hard a few times until you hear the first firing occur (fig. 12).
6. Turn the choke knob (15) counterclockwise to «OPEN» position (fig. 10)
IMPORTANT To avoid breaking the starter rope, do not pull the whole length of it or let
it slide along the edge of the cable guide hole. Release the starter gradually, to avoid
letting it fly back uncontrollably.
FIG 9.
FIG 10.
FIG 11.
