background image

9

Original Instructions Version May 16

 

280BVX/260BX_130516

3

• Scrupulously comply with local regulations and provisions for the disposal of oils, petrol,
damaged parts or any elements which have a strong impact on the environment; this waste must
not be disposed of as normal waste, it must be separated and taken to specified waste disposal
centres where the material will be recycled.

A

t the time of decommissioning, do not pollute the environment.

OPERATING INSTRUCTIONS

1. PREPARE THE MACHINE

The machine can be used as both a blower and a vacuum collector; for both of these uses it is
necessary to correctly arrange the appropriate accessories included with the equipment.

Unpacking and completing the assembly should be done on a flat and 
stable surface, with enough space for moving the machine and its 
packaging, always making use of suitable equipment.

IMPORTANT

 The safety systems prevent the engine from starting if the vacuum or blower tubes 

are not assembled correctly.

1.1 USE AS A BLOWER (Fig. 1) 

A

lign the protrusions of the first blower tube

(1) with the air outlet nozzle compartments (2),
then push the tube until it is firmly in place

A

lign  the  compartment  of  the  second

blower tube (3) with the protrusion (4) of the
first  tube,  push  the  tube  in  and  rotate  it  90
degrees clockwise to one of the two available
positions, until it is firmly in place

NOTE

 Fit the second tube with a flat or round end depending on the type of work to be 

accomplished; flat for a wider stream of air and higher velocity; round for more accuracy and a 
higher volume of air. To remove the first tube (1), insert the screwdriver included in the kit in 
the hole (5) and press firmly until you can slide the tube out from the air outlet nozzle.

260BX Premium Blower

280BVX Premium Blower/Vacuum

F) ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of considerable importance when using the
machine, for the benefit of both social coexistence and the environment in which we live. Try not
to cause any disturbance to the surrounding area.

Summary of Contents for 260BX Premium





























Reviews: