Mitel SX-200 ICP - 1.0 5020, Technician'S Handbook

Page: 17 / 360

9
Introduction
System configurations
The controller is configured at the factory as a square key telephone
system (KTS). It can be reconfigured by modifying the default database or
by installing one of the alternate databases supplied on the software
CD-ROM. For more information about alternate databases, see page 187.
The basic configuration is expandable through the purchase of additional
components, including DSP resources.
Table 2: SX-200 ICP System CX/CXi Configuration
Basic
Configuration
Expanded
Configuration
How Expanded
6 LS/CLASS circuits 12 Add Analog Options Board
4 ONS/CLASS circuits 8 Add Analog Options Board
16 IP Phone licenses 100 IP Phone licenses
and 16 IP trunks Purchase additional licenses
Add Layer 2 swtich(es)
4 voice mail ports 16 ports Purchase Options and DSP
resources (incremental)
16 voice mailbox licenses 748 Purchase additional licenses
(incremental)
Approximately 11 hours of
voice mail message storage Up to 450 hours of
voice mail storage Install internal hard drive
Three 3-party conferences 10 3-party Conferences
(30 conferees) Purchase DSP resources.
Dual DSP on motherboard - Dual DSP MMC and/or
T1/E1 Combo module
which includes one DSP
-Quad CIM MMC Purchase modules
Notes:
1.
Only Mitel-provided hard drives and CompactFlash cards should be
installed; those obtained elsewhere are not supported. See
Appendix B for part numbers.
2.
Larger capacity media is strongly advised for systems with more
than 16 lines or above average usage of voice mail or Record a Call.