147
Advanced Installation and Programming
To change the controller’s IP address and DHCP settings:
1.
Establish a serial connection to the Maintenance port on the
SX-200 ICP Controller (see page 70 for instructions).
2.
Log in to the CDE application.
3.
In Form 47 (IP Networking), Subform 01 (SYSTEM IP)
-
Enter values for IP ADDRESS, IP NETMASK, IP GATEWAY, and
other settings as required.
4.
Press ENTER.
5.
In Subform 02 (DHCP SERVER)
-
Enter the required values. See the SX-200 ICP Technical
Documentation for information on values to use.
-
To disable the controller’s DHCP server, press the DISABLE
softkey; press ENABLE to re-enable it.
6.
Press ENTER.
7.
Reset the system (see page 180 for instructions).
Configuring a Windows 2000 DHCP server (prior to Release 4.0)
You can modify a Windows 2000 DHCP server to support IP Phones. A
DHCP server must be configured to support the IP Phones for each
subnet. The following items must be configured:
•
TFTP Server IP address (system IP address of the SX-200 ICP)
•
IP address of the RTC card
•
Mitel tag “MITEL IP PHONE”
To modify a Windows 2000 DHCP Server:
1.
On the
Start
menu, point to
Programs
, then
Administrative Tools
,
and click
DHCP
.
2.
Highlight the Server name and point to
Action
, then click
Set
Predefined Options
.
3.
In the Predefined Options and Values window, click
Add
.
4.
In the
Option Type
window, set the following:
-
Name
: IP phone TFTP Server IP Address
-
Type
: IP Address
Summary of Contents for SX-200 ICP - 1.0 5020
