Routine Maintenance
35
Ro
utine
Maintenance
Enabling Options or Changing Options
Options Are Password Protected
Call the MITEL Order Desk to purchase a new set of options. You will
receive a new MITEL options password that will enable the options on
the system. The working hours for the MITEL Order Desk are Monday
to Friday 8:00 to 18:00 E.S.T.
Enabling Options On a SX-200 EL/ML System
1. Select Customer Data Entry mode.
2. Select Form 04, System Options.
3. Set all purchasable options to match those on the MITEL Options
Selection Sheet (MOSS). Set all other options as required. Press
ENTER only once after each entry.
4. Enter the MITEL options password (from the MOSS sheet received
with the software); press ENTER twice to activate the purchased
options.
5. Quit the form.
An E.8 error appears on the MCC if the enabled options and
purchased options do not match or if the password is incorrect. You
can still program a system with an E.8 error but the bays will not
bootup.
Enabling Options On a SX-200 LIGHT/DIGITAL
System
1. Verify that the correct decryption module is installed for the options
required.
When no system identification is installed, or when invalid
software is loaded into the system, the default system
identification number 65535 appears.
Summary of Contents for SX-200 EL
