Mitel SmarT-1 50000241, Installation And Programming Manual

Page: 83 / 90

Appendix 2 Default Data
8380-383-115-BA
Issue 1, February 1999
82
APPENDIX 2 DEFAULT DATA
A.2. 1. System Registers
A.2. 2. Line and Trunk Registers
Register Default Description Page No.
002 1 Called Party Programming Enable/Disable 38
003 0 Call Home Route to Use 72
004 0 Call Home Wait for Access Code 73
005 3 Call Home Wait for Carrier 73
011
✳
Carrier Presentation Time for Modem 38
014 0 Call Home Enable/Disable 74
015 0 Rotary Dialling Break Percentage 38
Register Default Description Page No.
100 2 Type of Exchange Line 40
102 4 MF4 Dialling Rate 1 40
103 2 On-hook Time 41
105 0 Time Between Release and Reseizure 41
106 5 Flash Generation Timer 41
108 2 Dial Tone Delay Timer 42
109 4 User Dial Tone 42
111 2 Inter-digit Time-out for Subscriber Side 42
112 2 Inter-digit Time-out for 0+ (National Calls) 43
113 2 Inter-digit Time-out on 00+ (International Calls) 43
114 4 Time Between Outgoing Rotary Digits 43
119 0 Off-hook, Route and Cost Centre Code Tones 44
120 4 Incoming Call Detection 44
121 4 Inter-ring Timing 45
122 # Repeat Call Attempt 45
123 8 Dialer Operation on Off-hook 45
124 0 Specify Default Route 46
126 0 PABX/Centrex Enable/Disable 46
127 0 Time to Auto-answer 46
128 6 Wait for Access/Security Code Timer 47
129 6 Security Code Lockout Timer 47
130 3 Off-hook Recognition Timer 47
132 0 Digit Recognition on Outgoing Calls 48