Mitel SmarT-1 50000241, Installation And Programming Manual

Page: 56 / 90

Access Control Sequences
8380-383-115-BA
55 Issue 1, February 1999
9. 11. 6R2 - Authorisation Number
You can enter an authorisation number that can be output automatically to access a Carrier. The
entry can be a maximum of 80 digits. This Register is dialled out by using the “4” ACS token.
Note: This register should end with a ##, which indicates that the string is finished.
9. 12. 6R3 - Dummy Cost Centre Code
You can program a Dummy Cost Centre Code that will substitute an Cost Centre Code, if a
complete Cost Centre Code is not dialled by the user (see Register R54/74 on page 76). The
entry can be a maximum of 80 digits. This Register is dialled out by using the “5” ACS token.
Note: This register should end with a ##, which indicates that the string is finished.
9. 13. 6R4 - User Defined Route String Register
You can program a number to be dialled out in the ACS. The entry can be a maximum of 80
digits. This Register is dialled out by the “9” ACS token.
Note: This register should end with a ##, which indicates that the string is finished.
Register Description
6R2
Where R is the Route Number 1 through 8. This entry may contain up to 80 characters
maximum, and is Blank by default.
Example: 612 1234567890##
Register Description
6R3
Where R is the Route Number 1 through 8. This entry may contain up to 80 characters
maximum, and is Blank by default.
Example: 613 1234567890##
Register Description
6R4
Where R is the Route Number 1 through 8. This entry may contain up to 80 characters
maximum, and is Blank by default.
Example: 614 1234567890##