Mitel SmarT-1 50000241, Installation And Programming Manual

Page: 42 / 90

Line and Trunk Options
8380-383-115-BA
41 Issue 1, February 1999
8. 4. 103 - On-hook Time
An on-hook is determined by the absence of loop current on the line from the Exchange, for
the specified amount of time.
8. 5. 105 - Time Between Trunk Release and Next Attempt to Connect
This option controls the length of time that the Dialer will remain on-hook (in the idle state)
prior to going back off-hook and re-dialling when it performs a drop and reseize.
8. 6. 106 - Flash Generation Timer
The Flash Generation Timer governs the duration of time that the Access Control Sequence
token
✳
09 will flash the PABX or Centrex line, upon the execution of the token.
Register Default Description
103 T 2
T = 0 for 150 ms 6 for 460 ms
T = 1 for 260 ms 7 for 500 ms
T = 2 for 300 ms 8 for 700 ms
T = 3 for 340 ms 9 for 1100 ms
T = 4 for 380 ms
✳
for 1300 ms
T = 5 for 420 ms # for 2500 ms
Register Default Description
105 T 0
T = 0 for 5.5 seconds 5 for 8.0 seconds
T = 1 for 6.0 seconds 6 for 8.5 seconds
T = 2 for 6.5 seconds 7 for 9.0 seconds
T = 3 for 7.0 seconds 8 for 9.5 seconds
T = 4 for 7.5 seconds 9 for 10 seconds
Register Default Description
106 T 5
T = 0 for 200 ms 6 for 1400 ms
T = 1 for 400 ms 7 for 1600 ms
T = 2 for 600 ms 8 for 1800 ms
T = 3 for 800 ms 9 for 2000 ms
T = 4 for 1000 ms
✳
for 2300 ms
T = 5 for 1200 ms # for 2500 ms