Mitel SmarT-1 380-003-FBCLXX, Installation And Programming Manual

Page: 77 / 94

Cost Centre Code Options
8380-383-115-BA
Issue 2, June 1999
76
CHAPTER 14
14. Cost Centre Code Options
14. 1. General
The SMarT-1 EuroRoute One-line Dialer can control user access to the Exchange line, or
carriers by means of Cost Centre Codes. The Dialer can also use the Cost Centre Codes as
Personal Identification Numbers. The Cost Centre Codes can be verified or non verified,
depending on the customers requirements. Due to the flexibility of the Dialer, most Cost
Centre Codes programming needs can be met.
14. 2. R52/R72 - Number of Cost Centre Code Digits
You can specify the number of cost centre code digits you expect the caller to dial before
accessing each route.
14. 3. R54/R74 - Cost Centre Code Type
You can specify the type of Cost Centre Code you expect on each route.
Route Register Description
Route 0
Route 1
Route 2
Route 3
Route 4
Route 5
Route 6
Route 7 152 T
252 T
352 T
452 T
172 T
272 T
372 T
472 T T = number of Cost Centre Code digits 1 - 9, and
✳
for 10
To change all Routes 0 - 3 to the same value use 552 T
To change all Routes 4 - 7 to the same value use 572 T
Refer to Appendix 2 for country-specific-default data.
Route Register Description
Route 0
Route 1
Route 2
Route 3
Route 4
Route 5
Route 6
Route 7 154 T
254 T
354 T
454 T
174 T
274 T
374 T
474 T T = 0 for flexible codes; wait for 6 second time-out then continue
T = 1 for no Cost Centre Codes
T = 2 for fixed-length Code per R52/R72
T = 3 for fixed-length Code per R52/B72; wait for 6 second time-out
and then go to 6R3 when no code is entered
To change all Routes 0 - 3 to the same value use 554 T
To change all Routes 4 - 7 to the same value use 574 T
Refer to Appendix 2 for country-specific-default data.