Mitel SmarT-1 380-003-FBCLXX, Installation And Programming Manual

Page: 67 / 94

Common Option Data
8380-383-115-BA
Issue 2, June 1999
66
CHAPTER 12
12. Common Option Data
Common Option Data refers to data that is common to all aspects of the SMarT-1 EuroRoute
One-line Dialer.
The default data of the following registers will depend on the country-specific-default data that
is used. Refer to Appendix 2 for the this data.
12. 1. R58/R78 - Action on Call Failure
The maximum number of call-retry attempts that the Dialer will allow is set in Register 122.
This limit is also true for Route changes in the Search Tables (see page 60) and with the
execution of token
✳
08 in the ACS (see page 49).
Route Register Description
Route 0
Route 1
Route 2
Route 3
Route 4
Route 5
Route 6
Route 7 158 T
258 T
358 T
458 T
178 T
278 T
378 T
478 T T = 0 for redial on Route 0
T = 1 for redial on Route 1
T = 2 for redial on Route 2
T = 3 for redial on Route 3
T = 4 for redial on Route 4
T = 5 for redial on Route 5
T = 6 for redial on Route 6
T = 7 for redial on Route 7
T = 8 for reorder tone
T = 9 for redial the same route once; then give reorder tone
T =
✳
for redial the same route twice; then give reorder tone
T = # for redial the same route three times; then give reorder tone
T = C for redial the same route once; then go to Route 0
T = D for redial the same route twice; then go to Route 0
T = E for redial the same route three times; then go to Route 0
T = F for reorder tone
To change all Routes 0 - 3 to the same value use 558 T
To change all Routes 4 - 7 to the same value use 578 T
Refer to Appendix 2 for country-specific-default data.