Mitel SmarT-1 380-003-FBCLXX, Installation And Programming Manual

Page: 59 / 94

Search Tables
8380-383-115-BA
Issue 2, June 1999
58
CHAPTER 11
11. Search Tables
11. 1. Primary, Alternate and PABX/Centrex Search Tables
Search Tables consist of a three digit prefix always beginning with an ‘8’ followed by two
digits indicating the length of the digit string. The next digits specify the number for the
SMarT-1 EuroRoute One-line Dialer to monitor, followed by an action digit which tells the
Dialer what to do once the string has been detected.
The default data of the Search Tables will depend on the country-specific-default data that is
used. Refer to Appendix 2 for this data.
11. 2. Format Example of a Search Table Entry
Search Tables are used to provide call control and routing information. Digits dialled by a
caller are screened from 1 to 15 digits, depending on the Search Table selected. Search Tables
are used for screening dialled digits and are subject to an action. The Dialer provides Search
Tables numbers 801 - 815 for Primary destination numbers, 821 - 835 and 841 - 845 for the
Secondary destination numbers or PABX/Centrex.
8XX N A ##
8 Indicates this is a search table entry
XX Indicates the digit(s) to screen for (01 - 15)
N Indicates the digit(s) to screen; relative to XX
A Action Code to take on dialled digits
## Terminates or Ends Entry
803 611 #6 ##
8 Indicates this is a search table entry
03 Indicates that we will screen the first 3 digits dialled by the customer
611 Indicates the three digits to be screened
#6
Action Code (If 611 is matched, then end of destination number any further digits dialled will
be screened as a Cost Centre Code)
##
Terminates the Entry