Mitel
®
Single-Line Phone User Guide – Issue 13, September 2009
Page 5
Getting Started
Using Account Codes
If your telephone system is programmed to use the Station Message Detail Recording (SMDR)
feature, you may be required to enter account codes when placing a call. Account codes record
information for telephone record reports. You may be required to enter account codes when
placing calls. Contact your system administrator for more information about using account
codes.
There are three types of account codes:
•
Standard account codes: Automatically entered into the telephone record report
whenever you place a call.
•
Forced account codes: Entered before you can place an outside call.
•
Optional account codes: Entered at any time during a call.
To enter an optional account code:
1.
Perform a hookflash, and then dial 390.
2.
Enter the optional account code. If the optional account code is not immediately
accepted, press #.
To set an account code for all calls placed from your phone:
Lift the handset, dial 391, and then the account code. If the account code is not
immediately accepted, press #. This code is used for all calls made from your phone until
it is disabled.
To disable the code:
Lift the handset, dial 391, and then press #.