Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 584 / 585

MiVoice Office 250 Installation and Administration Guide
556
4. Click Yes to erase all data.
5. Click OK to close the Format store succeeded dialog box.
6. In the Storage Properties dialog box, click New to create a new partition.
7. Enter a name for the partition, and then click OK .
8. Click Properties . The Partition Properties dialog box opens.
9. Click Dismount , and then press Format . The Format dialog box opens.
10. Verify that the Quick Format option is selected and click Start .
11. Click Yes to format.
12. Click OK to close the Format dialog box.
13. In the Partition Properties dialog box click Mount and then OK .
14. Close the Storage Properties dialog box and then exit the Control Panel.
15. Reinstall the client application as described on the following page.
Installing the 8690
The following lists the system requirements for installing the 8690 client application:
• Windows CE .NET v4.2. For details about Windows CE .NET Operating System, refer to the:
• MiVoice Office 250 Phone Administrator Guide
• MiVoice Office 250 Unified Voice Messaging Administrator Guide
• 400 MHz Processor, 128 MB RAM
• 5 MB Persistent Storage
The 8690 client application is distributed in a single CAB (cabinet) file. A CAB file contains one or
more application files compressed into a single archive file (such as a WinZip
®
file).
To install the client application on the 8690:
1. Obtain the latest CAB file,
8690Phone.8690_CEDOTNET_MIPSII.CAB
, from the Mitel eDocs Web
site (http://edocs.mitel.com).
2. Copy the CAB file onto your 8690 phone.
3. Double-click the CAB file to launch the installation program.
4. The display shows the default location,
\Mounted Volume\8690 Phone
, where the application
will be installed. Click OK to accept the default location.
NOTE
If you choose to install the product in some location other than the default, you must
make sure that you install it in the flash file system (somewhere in the Mounted Volume
folder). This ensures that the files will persist in the event that the phone is reset. When
the installation completes, launch 8690Phone.exe to start the client application.
If an installation or update fails, or if the application is partially installed, you must reformat
the flash file system on the phone. See page 555 for instructions on how to reformat the
8690 flash file system.